Straight Tri-Clamp Connector with Male Thread made of PP, PVDF or PFA
General Information
In applications requiring absolute cleanliness and reliability, such as in the pharmaceutical industry, our sterilisable Tri-Clamp threaded connectors are essential. The Tri-Clamp connector can be combined on the other side with a Series EMP-3 threaded connector for tubes, a Series EMP-4 threaded connector for pipes or a male thread. Hence, these are versatile threaded connectors that can also be mounted to any existing fittings with Tri-Clamp connectors. The Tri-Clamp threaded connector is easy to use. Simply press the two flange-like connector pieces against each other and fasten them together using the stainless steel locking clip. A sealing ring is situated between the connector pieces to maintain a proper seal. The resulting connection is form-fit and smooth and a wing nut on the locking clip makes it easy to quickly open and close the connection at any time.
Size, diameter and clip in accordance with DIN 32676, ISO 2852, BS 4825
Gaskets and retainer clips are to be ordered together with selected Tri-Clamps.
PP (Polypropylene)
Extremely good impact toughness and notch impact strength
Higher hardness and stiffness as well as better resilience than PE
Thermoforming possible
Very good dielectrical properties
Good resistance to alcohols, ketones, conc. acids and alkalis
Not stable to aromatic hydrocarbons, fats and oils, halogenes
Autoclavable
Resistant to hydrolysis
Physiologically safe
Regulatory compliance to FDA 21 CFR 177.1520, RoHS, BPA-free, DEHP-free, BSE/ADI-free
Colour: grey
Density: 0.90 g/cm3
Temperature range: +5 to +90 °C
Shore hardness D: 72°
Max. operating pressure: 6 bar at +20 °C
Water absorption: <0.05 %
Tensile strength: 25 - 40 N/mm2
Elongation at break: 800 %
Surface resistance: >1013 Ohm
Melt flow index MFR: 0.3 g/10 min.
PVDF (Polyvinylidene fluoride)
High-quality technical plastic for chemical apparatus and machine building, especially in the petrochemical, metallurgical, pharmaceutical, food processing, paper and textile industry as well as in the nuclear technology.
High impact toughness even at low temperatures
Good breakdown strength
Low dielectric loss factor
Highest mechanical stability and stiffness
Meeting highest purity requirements
Comply with the guidelines from FDA and USP class VI, additionally PVDF has the KTW approval. Up to +150 °C it is non-toxic and since it has a similar property to glass it is a no-culture medium for microorganisms.
Can be treated by autoclave (absolute sterile) and sterilized with gamma-rays without losing its mechanical qualities
Outstanding resistance to UV, weather and aging
Flame-resistant
High thermal stability
Resistant to alcohols, fats and oils, halogenes, alkalis, acids
Not stable to aromatic hydrocarbons, ketones, amines, pyridine, dimethylformamide, hot alkalis, fuming sulfuric acid
Colour: nature, slightly translucent
Density: 1.75 g/cm3
Temperature range: -40 to +140 °C
Shore hardness D: 79°
Max. operating pressure: 6 bar at +20 °C
Water absorption: <0.04 %
Tensile strength: 38 - 50 N/mm2
Surface resistance: >1013 Ohm
Melt flow index MFR: 6 g/10 min.
PTFE (Polytetrafluoroethylene)
Heavy-duty plastic
Antiadhesive surface
Outstanding sliding properties
Lowest friction coefficient of all fluorinated plastics
Excellent stress cracking resistance
Excellent weather resistance
Highest gas-tightness
No water absorption
Very good dielectric properties independent of frequency and temperature
Very good electrical insulating capacity also at air humidity
High tracking resistance
Non-combustible
Colour: milky, white
Density: 2.20 g/cm3
Temperature range: -200 to +150 °C
Shore hardness D: 60°
Max. operating pressure: 6 bar at +20 °C
Tearing strength: 30 - 40 N/mm2
Elongation at break: 300 %
Water absorption: 0.01 %
Surface resistance: >1017 Ohm
PFA (Perfluoroalkoxy)
High-quality technical plastic for chemical apparatus and machine construction as well as electrical engineering
Chemical, thermal and dielectrical properties practically such as PTFE, but suitable for thermoplastic processing (welding, die casting, deep drawing). Lower medium diffusion, better transparency, larger hardness and better dimensional stability (lower tendency to cold flow) compared to PTFE.
Highest temperature resistance of all meltable fluorinated plastics
Very high dimensional stability in heat
Very high resistance to media
Very good pressure resistance
Low friction coefficient
Can be treated by autoclave (absolute sterile)
Comply with the guidelines from FDA and USP class VI.
Excellent resistance to weather
Flame-resistant
Colour: milky, translucent
Density: 2.10 g/cm3
Temperature range: -200 to +200 °C (highest dimensional stability in heat)
Shore hardness D: 60° to 65°
Max. operating pressure: 6 bar at +20 °C
Coefficient of sliding friction: 0.2 - 0.3 (dynamic against steel, dry)
Tensile strength: 27 to 32 N/mm2 at +23 °C
Water absorption: <0.03 %
Dielectric constant: 2,1
Surface resistance: >1017 Ohm
Item | Image | External thread |
Tri-Clamp Ø mm
|
L mm
|
L1 mm
|
L2 mm
|
SW mm
| Werkstoff |
Einheit Stück
|
Price Euro* | Buy |
---|
Item
|
Image
|
External thread
|
Tri-Clamp Ø mm
|
L mm
|
L1 mm
|
L2 mm
|
SW mm
|
Werkstoff
|
Einheit Stück
|
Price Euro* |
Buy
|
---|---|---|---|---|---|---|---|---|---|---|---|
341124 |
|
G 1/8" | 25 | 25,5 | 8 | 22 | 13 | PP | 4 | 42.00 | |
341125 |
|
G 1/4" | 25 | 30 | 12 | 26,5 | 14 | PP | 4 | 60.00 | |
341126 |
|
G 1/4" | 34 | 32 | 12 | 29 | 16 | PP | 4 | 70.00 | |
341127 |
|
G 3/8" | 34 | 32,5 | 12 | 29,7 | 21 | PP | 4 | 91.00 | |
341128 |
|
G 1/2" | 34 | 35 | 14 | 32 | 22 | PP | 4 | 112.00 | |
341129 |
|
G 1/2" | 50,5 | 38,5 | 14 | 35,7 | 26 | PP | 4 | 130.00 | |
341130 |
|
G 3/4" | 50,5 | 40,5 | 16 | 37,7 | 32 | PP | 4 | 183.00 | |
341131 |
|
G 1" | 50,5 | 42,5 | 18 | 39,7 | 39 | PP | 4 | 248.00 | |
341132 |
|
NPT 1/8" | 25 | 31 | 10 | 27,5 | 17 | PP | 4 | 42.00 | |
341133 |
|
NPT 1/4" | 25 | 36 | 15,1 | 32,5 | 17 | PP | 4 | 60.00 | |
341134 |
|
NPT 1/4" | 34 | 36 | 15,1 | 32,5 | 17 | PP | 4 | 70.00 | |
341135 |
|
NPT 3/8" | 34 | 37,3 | 15,26 | 33,8 | 22 | PP | 4 | 91.00 | |
341136 |
|
NPT 1/2" | 34 | 43 | 19,85 | 42,5 | 24 | PP | 4 | 112.00 | |
341137 |
|
NPT 1/2" | 50,5 | 49 | 19,85 | 45,5 | 36 | PP | 4 | 130.00 | |
341138 |
|
NPT 3/4" | 50,5 | 49 | 20,15 | 45,5 | 36 | PP | 4 | 183.00 | |
341139 |
|
NPT 1" | 50,5 | 56 | 25,01 | 52,5 | 41 | PP | 4 | 248.00 | |
341164 |
|
G 1/8" | 25 | 25,5 | 8 | 22 | 13 | PVDF | 4 | 155.00 | |
341165 |
|
G 1/4" | 25 | 30 | 12 | 26,5 | 14 | PVDF | 4 | 170.00 | |
341166 |
|
G 1/4" | 34 | 32 | 12 | 29 | 16 | PVDF | 4 | 214.00 | |
341167 |
|
G 3/8" | 34 | 32,5 | 12 | 29,7 | 21 | PVDF | 4 | 284.00 | |
341168 |
|
G 1/2" | 34 | 35 | 14 | 32 | 22 | PVDF | 4 | 352.00 | |
341169 |
|
G 1/2" | 50,5 | 38,5 | 14 | 35,7 | 26 | PVDF | 2 | 202.00 | |
341170 |
|
G 3/4" | 50,5 | 40,5 | 16 | 37,7 | 32 | PVDF | 2 | 219.00 | |
341171 |
|
G 1" | 50,5 | 42,5 | 18 | 39,7 | 39 | PVDF | 2 | 287.00 | |
341172 |
|
NPT 1/8" | 25 | 31 | 10 | 27,5 | 17 | PVDF | 4 | 155.00 |