+49 (0) 6221-3125-0 (Mon-Wed 8 am - 17 pm, Thu-Fri 8 am - 16 pm)

Plate made of PEEK

Plate made of PEEK
Plate made of PEEK
 
   
Application area Engine parts, plain bearings, insulations, butterfly valves Product... more

Application area

Engine parts, plain bearings, insulations, butterfly valves

Product specification

Heavy-duty plastic

Outstanding mechanical stability, stiffness and hardness

High heat stability

Good impact toughness

Best wear resistance

Very good chemical resistance, except for conc. sulfuric acid, conc. nitric acid and aqua regia (chloronitrous acid)

Outstanding hydrolysis resistance

Very high temperature resistance (outstandingly high operating temperature)

Good creep resistance even at high temperatures

Very high dimensional stability

Inherent flame resistance

Low formation of smoke

Good electrical insulating properties as well as favorable dielectric characteristics

Outstanding radiation resistance

High-quality technical plastic (high-tech polymer), predominantly for mechanically and thermally highly loaded parts, also with antifrictional property for machine building, pump and fitting construction as well as for electrical engineering.

For replacement of PTFE because of increased mechanical stability, outstanding wear resistance.

For replacement of metals for pump bottom parts, valve seats, sliding elements, gearwheels, carrying wheels, high-temperature insulating parts in electrical engineering, parts in touch with boiling water or hot steam.

Technical specification

Material: PEEK (polyether-etherketone)

Colour: yellow-brown

Density: 1.32 g/cm3 (ISO 1183)

Temperature range: up to +250 °C, for a short time +310 °C

Melting point: +340 °C (ISO 3146)

Thermal conductivity: 0.25 W/m * K (DIN 52612)

Flammability rating: UL 94 V-0 (thickness 1.5 mm)

Tensile strength: 110 N/mm2 (ISO 527-2)

Elongation at break: 20 % (ISO 527-2)

Tensile modulus: 4,400 N/mm2 (ISO 527-2)

Rockwell hardness: M 105 (ISO 2039-2)

Notch impact strength: 3.5 KJ/m2 (ISO 179/1eA)

Dielectric loss factor:

at 1 MHz: 0.002 (IEC 60250)

at 100 Hz: 0.001 (IEC 60250)

Dielectric strength: 24 kV/mm (IEC 60243-1)

Volume resistivity: 1012 Ohm x m (IEC 60093)

Surface resistivity: 1013 Ohm (IEC 60093)

Regulations: according to BfR and FDA

No additional information available.
Similar products
Customers also viewed
Viewed