Universal Nipple with Male Thread made of PP, PVDF or PFA - loose cap nut DIN 8063
Product specification
Male G- or NPT-thread on one side, female G- or NPT-thread on the other side, loose cap nut
General Information
The connectors of Series EMP-E3 can be directly fastened to existing fittings with DIN 8063 male threads and are immediately ready for use with both flexible and rigid tubes. The special design of our connectors integrates many features in a single product that would otherwise have to be tediously welded together from various components. The inlay component -manufactured from a single piece- contains an integrated thread connector. This helps to ensure that the connector is leak-proof and thus safe to use. To allow for a range of threaded connectors, the loose cap nut is available in typical sizes from G 3/4" to G 1 1/2". These can be combined with various tube and pipe connectors as well as with G or NPT external thread.
PP (Polypropylene)
Extremely good impact toughness and notch impact strength
Higher hardness and stiffness as well as better resilience than PE
Thermoforming possible
Very good dielectrical properties
Good resistance to alcohols, ketones, conc. acids and alkalis
Not stable to aromatic hydrocarbons, fats and oils, halogenes
Autoclavable
Resistant to hydrolysis
Physiologically safe
Regulatory compliance to FDA 21 CFR 177.1520, RoHS, BPA-free, DEHP-free, BSE/ADI-free
Colour: grey
Density: 0.90 g/cm3
Temperature range: +5 to +90 °C
Shore hardness D: 72°
Max. operating pressure: 6 bar at +20 °C
Water absorption: <0.05 %
Tensile strength: 25 - 40 N/mm2
Elongation at break: 800 %
Surface resistance: >1013 Ohm
Melt flow index MFR: 0.3 g/10 min.
PVDF (Polyvinylidene fluoride)
High-quality technical plastic for chemical apparatus and machine building, especially in the petrochemical, metallurgical, pharmaceutical, food processing, paper and textile industry as well as in the nuclear technology.
High impact toughness even at low temperatures
Good breakdown strength
Low dielectric loss factor
Highest mechanical stability and stiffness
Meeting highest purity requirements
Comply with the guidelines from FDA and USP class VI, additionally PVDF has the KTW approval. Up to +150 °C it is non-toxic and since it has a similar property to glass it is a no-culture medium for microorganisms.
Can be treated by autoclave (absolute sterile) and sterilized with gamma-rays without losing its mechanical qualities
Outstanding resistance to UV, weather and aging
Flame-resistant
High thermal stability
Resistant to alcohols, fats and oils, halogenes, alkalis, acids
Not stable to aromatic hydrocarbons, ketones, amines, pyridine, dimethylformamide, hot alkalis, fuming sulfuric acid
Colour: nature, slightly translucent
Density: 1.75 g/cm3
Temperature range: -40 to +140 °C
Shore hardness D: 79°
Max. operating pressure: 6 bar at +20 °C
Water absorption: <0.04 %
Tensile strength: 38 - 50 N/mm2
Surface resistance: >1013 Ohm
Melt flow index MFR: 6 g/10 min.
PFA (Perfluoroalkoxy)
High-quality technical plastic for chemical apparatus and machine construction as well as electrical engineering
Chemical, thermal and dielectrical properties practically such as PTFE, but suitable for thermoplastic processing (welding, die casting, deep drawing). Lower medium diffusion, better transparency, larger hardness and better dimensional stability (lower tendency to cold flow) compared to PTFE.
Highest temperature resistance of all meltable fluorinated plastics
Very high dimensional stability in heat
Very high resistance to media
Very good pressure resistance
Low friction coefficient
Can be treated by autoclave (absolute sterile)
Comply with the guidelines from FDA and USP class VI.
Excellent resistance to weather
Flame-resistant
Colour: milky, translucent
Density: 2.10 g/cm3
Temperature range: -200 to +200 °C (highest dimensional stability in heat)
Shore hardness D: 60° to 65°
Max. operating pressure: 6 bar at +20 °C
Coefficient of sliding friction: 0.2 - 0.3 (dynamic against steel, dry)
Tensile strength: 27 to 32 N/mm2 at +23 °C
Water absorption: <0.03 %
Dielectric constant: 2,1
Surface resistance: >1017 Ohm
Item | Image | External thread | Innengewinde |
D1 mm
|
L mm
|
L1 mm
| Werkstoff |
Einheit Stück
|
Price Euro* | Buy |
---|
Item
|
Image
|
External thread
|
Innengewinde
|
D1 mm
|
L mm
|
L1 mm
|
Werkstoff
|
Einheit Stück
|
Price Euro* |
Buy
|
---|---|---|---|---|---|---|---|---|---|---|
341629 |
|
G 1/4" | G 3/4" | 38 | 40 | 12 | PP | 5 | 183.00 | |
341630 |
|
G 1/4" | G 1" | 46 | 42 | 12 | PP | 5 | 201.00 | |
341631 |
|
G 3/8" | G 1" | 46 | 42,5 | 12 | PP | 5 | 240.00 | |
341632 |
|
G 1/2" | G 1" | 46 | 45 | 14 | PP | 3 | 178.00 | |
341633 |
|
G 3/8" | G 1 1/4" | 56 | 45,5 | 12 | PP | 5 | 226.00 | |
341634 |
|
G 1/2" | G 1 1/4" | 56 | 48 | 14 | PP | 3 | 192.00 | |
341636 |
|
G 1/2" | G 1 1/2" | 66 | 52 | 14 | PP | 3 | 206.00 | |
341637 |
|
G 1" | G 1 1/2" | 66 | 56 | 18 | PP | 2 | 231.00 | |
341638 |
|
NPT 1/4" | NPT 3/4" | 38 | 40 | 12 | PP | 5 | 183.00 | |
341639 |
|
NPT 1/4" | NPT 1" | 46 | 42 | 12 | PP | 5 | 201.00 | |
341640 |
|
NPT 3/8" | NPT 1" | 46 | 42,5 | 12 | PP | 1 | 55.00 | |
341641 |
|
NPT 1/2" | NPT 1" | 46 | 45 | 14 | PP | 1 | 59.00 | |
341642 |
|
NPT 3/8" | NPT 1 1/4" | 56 | 45,5 | 12 | PP | 1 | 64.00 | |
341643 |
|
NPT 1/2" | NPT 1 1/4" | 56 | 48 | 14 | PP | 1 | 94.00 | |
341644 |
|
NPT 1" | NPT 1 1/4" | 56 | 52 | 18 | PP | 1 | 114.00 | |
341645 |
|
NPT 1/2" | NPT 1 1/2" | 66 | 52 | 14 | PP | 1 | 91.00 | |
341647 |
|
G 1/4" | G 3/4" | 38 | 40 | 12 | PVDF | 1 | 91.00 | |
341648 |
|
G 1/4" | G 1" | 46 | 42 | 12 | PVDF | 1 | 98.00 | |
341649 |
|
G 3/8" | G 1" | 46 | 42,5 | 12 | PVDF | 1 | 142.00 | |
341650 |
|
G 1/2" | G 1" | 46 | 45 | 14 | PVDF | 1 | 162.00 | |
341651 |
|
G 3/8" | G 1 1/4" | 56 | 45,5 | 12 | PVDF | 2 | 178.00 | |
341652 |
|
G 1/2" | G 1 1/4" | 56 | 48 | 14 | PVDF | 1 | 167.00 | |
341654 |
|
G 1/2" | G 1 1/2" | 66 | 52 | 14 | PVDF | 1 | 183.00 | |
341655 |
|
G 1" | G 1 1/2" | 66 | 56 | 18 | PVDF | 1 | 240.00 | |
341656 |
|
NPT 1/4" | NPT 3/4" | 38 | 40 | 12 | PVDF | 1 | 112.00 |