+49 (0) 6221-3125-0 (Mon-Wed 8 am - 17 pm, Thu-Fri 8 am - 16 pm)

Silicone Special Compound Analytical Tubing

Silicone Special Compound Analytical Tubing
Silicone Special Compound Analytical Tubing
 
   
Product specification Injection-molded of especially high-grade silicone elastomer, annealed... more

Product specification

Injection-molded of especially high-grade silicone elastomer, annealed twice for 20 hrs at +20 °C in the rotary furnace

Absolutely homogenous quality paired with high flexibility

Physiologically safe in every respect

Free from natural rubber latex, dry natural rubber, or synthetic latex

Excellent stability in heat and hot air

Highest flexibility in cold

Very good resistance to ozone, aging, and weather

Very good dielectric properties; tested especially for breakdown strength under wet conditions

Antiadhesive surface

High permeability to gas

Good radiation resistance

High electrical insulating capacity

High resistance to a wide spectrum of chemical compounds

Technical specification

Material: Silicone (silicone rubber)

Colour: transparent

Shore hardness A: 60° ±5° (DIN 53505)

Temperature range: -60 to +200 °C (Class H); for a short period +350 °C

Resistance to hot steam: +140 °C

Sterilization: steam (+136 °C)

Embrittlement temperature: -65 °C

Density: 1.19 g/cm3

Rebound elasticity: 35 % (DIN 53505)

Elongation at break: 300 % (DIN 53504 S2)

Dielectric strength: ca. 18 kV/mm (VDE 0303)

Volume Resistivity: 1015 Ohm x cm/+20 °C (VDE 0303)

Dielectric constant: 3.2/+25 °C/50 Hz (DIN 53482)

Tolerances inside Ø and wall thickness:

from 0.2 - 2 mm ±0.15 mm

from 2.5 - 5 mm ±0.25 mm

from 5.5 - 12 mm ±0.3 mm

from 13 - 20 mm ±0.4 mm

from 22 - 30 mm ±0.6 mm

above ±0.8 mm

No additional information available.
Accessories
Similar products
Customers also bought
Customers also viewed
Thomaplast IV Thomaplast IV
Viewed